צבת AC\DC
This heavy duty auto-ranging True RMS clamp meter REED R5060 (was CM-9930) is capable of measuring AC/DC current and voltage, resistance, capacitance, duty cycle and frequency.
₪1
- מק"ט / ברקוד:: CM-9930R
קרא עוד
Thanks to its specifications and features, the Reed R5060 (also known as REED CM-9930) delivers safety, durability and assures excellent performance and accuracy for a large kind of measurements: AC or DC current tests, resistance, made continuity Check or Diode Test, Capacitance tests or frequency measurements. This Reed non-contact voltage detector has 0.35 seconds sampling rate and provides overload protection for all ranges.
- 2 in 1, 2000A clamp meter and digital multimeter
- LSI circuit provides high reliability and durability
- Overload protection circuit is provided for all ranges
- Compact & heavy duty ABS and fireproof plastic case
- Installation category III
- Pollution degree 2
- Altitude up to 2000 meters
| AC/DC Current | |
| Range | Clamp: 400, 2000A Test Leads: 400, 4000µA, 40, 400mA |
| Accuracy | AC/DC Clamp: ±(2% rdg. +8 dgt.) AC/DC Test Leads: ±(1.2% rdg. +5 dgt.) |
| Resolution | AC/DC Clamp: 0.1, 1A AC/DC Test Leads: 0.1µA, 1µA, 0.01mA, 0.1mA |
| AC/DC Voltage | |
| Range | AC: 4, 40, 400, 1000V DC: 400mV, 4, 40, 400, 1000V |
| Accuracy | AC: ±(1.2% rdg. +5 dgt.) DC: ±(1% rdg. +2 dgt.) |
| Resolution | 0.1mV, 0.001V, 0.01V, 0.1V, 1V |
| Resistance | |
| Range | 400Ω, 4, 40, 400kΩ, 4, 40MΩ |
| Accuracy | ±(2% rdg. +2 dgt.) 0.1Ω, 1Ω, 10Ω, 100Ω, 1kΩ, 10kΩ |
| Capacitance | |
| Range | 50, 500nF, 5, 50µF |
| Accuracy | ±(3% rdg. +5 dgt.) |
| Resolution | 10pF, 100pF, 0.001µF, 0.01µF |
| Frequency | |
| Range | 5, 50, 500Hz, 5, 50kHz, 100kHz |
| Accuracy | ±(1% rdg. +5 dgt.) |
| Resolution | 0.001Hz, 0.01Hz, 0.1Hz, 1Hz, 0.01kHz, 0.1kHz |
| General Specifications | |
| Range Selection | Autoranging |
| True RMS | Yes |
| Display | 4,000 count LCD display |
| Display Hold | Yes |
| Zero Push Button Adjustment | Yes |
| Relative Mode | Yes |
| Diode Test | Yes |
| Backlit Display | Yes |
| Continuity Check | Audible signal if resistance <10Ω |
| Duty Cycle | Yes |
| Kick Stand | Yes |
| Power Supply | 9V Battery |
| Low Battery Indicator | Yes |
| Jaw Opening | 2.36" (60mm), up to 750 MCM |
| Overvoltage Category | CAT. III 1000V |
| Product Certifications | CE |
| Operating Temperature | 32 to 122°F (0 to 50°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Dimensions | 10x 2.9 x 1.5" (255 x 73 x 38 mm) |
| Weight | 13.4oz (380g) |